The Peaberry SDR is no longer available but the manuals and downloads are archived here.

Peaberry SDR V2 $149.00

The Peaberry SDR V2 is a Software Defined Radio transceiver for the HF amateur bands (FCC part 97). It’s available as a kit that you build yourself. An illustrated manual covers assembly, testing, and installation of HDSDR. Because the radio is software defined, the modes you can operate are determined by the applications running on your computer. There is software available for every known mode. You can even design your own modes if you have the expertise.

Build your Peaberry SDR V2 for the 160/80/75m, 80/75/60/40m, 60/40/30/20m, 30/20/17/15m, or 17/15/12/10m bands. All kits include parts for all bands so you do not need to decide until you are ready to start building.

  • CW now supports QSK with the new Peaberry CW application.
  • 96kHz digital I/Q interface. No additional sound card needed.
  • Two tone, 2 kHz spacing, third-order dynamic range: 99 dB.
  • 1 watt transmitter. (above 20m may be less)
  • Support for Elecraft T1 automatic antenna tuner.
  • DG8SAQ/PE0FKO/SoftRock control interface.
  • Open Source firmware.
  • USB bootloader.

Downloads:

Peaberry SDR V1 Kit $149.00

An HF transceiver kit for Software Defined Radio. The Peaberry SDR is the first and only do-it-yourself transceiver that doesn’t require adding sound cards to your computer.

You choose to build it for the 160m, 80m/40m, 40m/30m/20m or 30m/20m/17m bands. All kits include parts for all bands so you do not need to decide until you are ready to start building.

  • 96/48kHz digital I/Q interface.
  • 48kHz stereo speaker.
  • 48kHz microphone.
  • 1 watt transmitter.
  • Softrock control interface.
  • Open Source firmware.

Downloads:

Image Archive

Screenshot Screenshot Screenshot Screenshot Screenshot AE9RB